Free delivery on the 10-pack

Bag 0

Motorola · tempered glass · cut for one phone

Motorola Razr 70 Ultra Super X Clear tempered glass

4" · No cutout · Flat panel · 0.33mm · 9H

₹999 MRP ₹3,330 70% off

₹100 each · 10-pack

Shops sell one screen guard for up to ₹799. We sell direct, so yours costs ₹100 a sheet — same 9H glass, no middleman.

Inclusive of all taxes. ₹50 delivery — free with the 10-pack.

Finish
Pack size

Order before 4 PM IST — dispatched today from Bengaluru.

₹250 nowPartial COD, rest at the door 7 daysReturns on unused glass Chipped?A photo gets a new sheet

Glass only — no alignment frame or cleaning kit in the pack.

10 × tempered glass · phone not included · TG-MOT-MOTOROLARAZR70ULTRA-REG-10

Add a Motorola Razr 70 Ultra skinBack + front · Matte or Clear · ships together New →

What fits

Why this fits your Motorola Razr 70 Ultra

Display
4"
Edge
Flat panel
Cutout
No cutout
Unlock
Side-mounted reader
Thickness
0.33mm

Cut for the Motorola Razr 70 Ultra’s 4-inch cover screen — the outer display you use with the phone closed. The inner folding screen needs a flexible film, not glass. There is no camera cutout on this screen to work around. The fingerprint reader is in the side button, so the glass never touches it.

The Motorola Razr 60 Ultra is also 4-inch, but it is cut separately — order the sheet for your exact model.

In every pack

10×

Tempered glass sheets, cut for the Motorola Razr 70 Ultra

Glass only. There is no alignment frame, cleaning pad or dust sticker in the pack, and the phone is not included.

Fitting it

Four steps, ten minutes

The full guide, with pictures →
  1. 01

    Clean the screen with a lint-free cloth, then lift any dust left with a strip of clear tape — a single speck is what causes a permanent bubble.

  2. 02

    Peel the backing and hold the sheet by its edges over the Motorola Razr 70 Ultra. Line up the cut-outs at the top first, then the sides.

  3. 03

    Lower the glass onto the centre of the panel and let go. The adhesive pulls itself outward from the middle.

  4. 04

    Press any remaining edge gently toward the border. Small perimeter bubbles clear on their own within 24 hours.

Questions about the Motorola Razr 70 Ultra

Does the glass affect the fingerprint reader on the Motorola Razr 70 Ultra?

No. The Motorola Razr 70 Ultra’s reader is built into the side power button, so the glass never covers it.

Will a Motorola Razr 60 Ultra protector fit the Motorola Razr 70 Ultra?

Don’t count on it. Both are 4-inch flat panels, but matching numbers do not mean a matching outline — corner radius and border widths differ between models. Pick the Motorola Razr 70 Ultra sheet.

Does this protect the inner folding screen of the Motorola Razr 70 Ultra?

No. It is cut for the 4-inch cover screen only. The inner screen folds, and rigid glass would crack at the hinge — keep the factory-fitted film on it.

What happens if one arrives damaged?

Check the pack when it arrives. A sheet that is chipped, cracked or cut for the wrong model is replaced — send us a photo and we ship a new one. You do not need to send the damaged sheet back.

How much is delivery, and how do I pay?

Delivery is ₹50 on the 3-pack and the 5-pack, free on the 10-pack. Pay in full online — UPI, cards, netbanking — or Partial COD, which costs nothing extra: a ₹250 booking fee online to confirm, and the rest in cash at the door. Orders placed before 4 PM IST are dispatched the same day.

Is it full glue or UV glass?

Full glue, not UV. The adhesive covers the whole sheet rather than a frame round the edge, so there is no air gap over the display or an in-display reader — and it is already on the glass: peel, line up, press. No liquid glue and no UV lamp.

Will it fit inside my case?

Yes. We cut to the active display area rather than the full front face, which leaves the case lip clear on every model we support. A protector cut edge-to-edge is the one that fights a case.

More on delivery, payment, returns and bulk orders: all questions →

Before and after