Popular
Brands
No phone matches “”. Your exact model name is in Settings → About phone, or tell us your model.
Search all phones →9H tempered glass cracks or chips in your hand, so the Motorola Razr 60’s display underneath doesn’t.
9H glass 
Motorola Razr 60 · phone not included 0.33 mm thin and bonded across its whole surface — no air gap between your finger and the Motorola Razr 60’s display.
Full-surface adhesive Motorola Razr 60 · phone not included No tint, no etch, no haze. The Motorola Razr 60’s colour, brightness and sharpness stay as its maker calibrated them.
A flat display, so the sheet covers the full panel and bonds edge to edge, with nothing to lift at the sides.
Motorola Razr 60 · phone not included The Motorola Razr 60 unlocks from its side key, and the glass covers only the screen.
Side key Motorola Razr 60 · phone not included One price for every phone, the Motorola Razr 60 included. A spare is always in the drawer.
Shops sell one screen guard for up to ₹799; we sell direct. Glass only — no alignment frame or cleaning kit in the pack.
Motorola Razr 60 · phone not included 
Phone shown for reference — not included. You receive the tempered glass only.
Motorola · tempered glass · cut for one phone
3.6" · No cutout · Flat panel · 0.33mm · 9H
This glass is cut for the Motorola Razr 60 only. Have the Motorola Razr 60 Ultra? It needs its own cut — Motorola Razr 60 Ultra tempered glass →
₹999 MRP ₹3,330 70% off
Shops sell one screen guard for up to ₹799. We sell direct, so yours costs ₹100 a sheet — same 9H glass, no middleman.
Inclusive of all taxes. ₹50 delivery — free with the 10-pack. Saves against buying 3s.
Order before 4 PM IST — dispatched today from Bengaluru.
Glass only — no alignment frame or cleaning kit in the pack.
10 × tempered glass · phone not included · TG-MOT-MOTOROLARAZR60-REG-10
Add a Motorola Razr 60 skinBack + front · Matte or Clear · ships together New →What fits
Cut for the Motorola Razr 60’s 3.6-inch cover screen — the outer display you use with the phone closed. The inner folding screen needs a flexible film, not glass. There is no camera cutout on this screen to work around. The fingerprint reader is in the side button, so the glass never touches it.
Not interchangeable with the Motorola Razr 60 Ultra: the Motorola Razr 60 Ultra is 4 inches against the Motorola Razr 60’s 3.6.
Doesn't fit: Motorola Razr 60 Ultra — different panel size or cutout, despite being in the same Razr 60.
In every pack
10×
Tempered glass sheets, cut for the Motorola Razr 60
Glass only. There is no alignment frame, cleaning pad or dust sticker in the pack, and the phone is not included.
Fitting it
Clean the screen with a lint-free cloth, then lift any dust left with a strip of clear tape — a single speck is what causes a permanent bubble.
Peel the backing and hold the sheet by its edges over the Motorola Razr 60. Line up the cut-outs at the top first, then the sides.
Lower the glass onto the centre of the panel and let go. The adhesive pulls itself outward from the middle.
Press any remaining edge gently toward the border. Small perimeter bubbles clear on their own within 24 hours.
No. The Motorola Razr 60’s reader is built into the side power button, so the glass never covers it.
No. The Motorola Razr 60 Ultra is 4 inches against the Motorola Razr 60’s 3.6 — a cut for one will not sit right on the other.
No. It is cut for the 3.6-inch cover screen only. The inner screen folds, and rigid glass would crack at the hinge — keep the factory-fitted film on it.
Check the pack when it arrives. A sheet that is chipped, cracked or cut for the wrong model is replaced — send us a photo and we ship a new one. You do not need to send the damaged sheet back.
Delivery is ₹50 on the 3-pack and the 5-pack, free on the 10-pack. Pay in full online — UPI, cards, netbanking — or Partial COD, which costs nothing extra: a ₹250 booking fee online to confirm, and the rest in cash at the door. Orders placed before 4 PM IST are dispatched the same day.
Full glue, not UV. The adhesive covers the whole sheet rather than a frame round the edge, so there is no air gap over the display or an in-display reader — and it is already on the glass: peel, line up, press. No liquid glue and no UV lamp.
Yes. We cut to the active display area rather than the full front face, which leaves the case lip clear on every model we support. A protector cut edge-to-edge is the one that fights a case.
More on delivery, payment, returns and bulk orders: all questions →
More in the Razr 60
Before and after
Popular
Browse by brand
We don’t stock that one yet.
Tell us what you’re using and we’ll cut for it. Every miss is logged and reviewed weekly — it’s how the catalogue grows.
Capture endpoint lands in Phase 2 (docs/03 §17)
One spin a day
Three prizes, all of them real: free delivery, 5% off 10-packs, or ₹50 off. Every segment on the wheel is one of them.
