Free delivery on the 10-pack

Bag 0

Realme · tempered glass · cut for one phone

Realme 12 Pro Plus Super X Clear tempered glass

6.7" · Centre punch-hole · Curved edge · 0.33mm · 9H

This glass is cut for the Realme 12 Pro Plus only. Have the Realme 12? It needs its own cut — Realme 12 tempered glass →

This glass is cut for the Realme 12 Pro Plus only. Have the Realme 12 Pro? It needs its own cut — Realme 12 Pro tempered glass →

₹999 MRP ₹3,330 70% off

₹100 each · 10-pack

Shops sell one screen guard for up to ₹799. We sell direct, so yours costs ₹100 a sheet — same 9H glass, no middleman.

Inclusive of all taxes. ₹50 delivery — free with the 10-pack.

Finish
Pack size

Order before 4 PM IST — dispatched today from Bengaluru.

₹250 nowPartial COD, rest at the door 7 daysReturns on unused glass Chipped?A photo gets a new sheet

Glass only — no alignment frame or cleaning kit in the pack.

10 × tempered glass · phone not included · TG-REA-REALME12PROPLUS-REG-10

Add a Realme 12 Pro Plus skinBack + front · Matte or Clear · ships together New →

What fits

Why this fits your Realme 12 Pro Plus

Display
6.7"
Edge
Curved edge
Cutout
Centre punch-hole
Unlock
Optical in-display reader
Thickness
0.33mm

The Realme 12 Pro Plus’s 6.7-inch display curves away at the sides. Rigid glass cannot follow the bend, so the sheet stops just inside it and is bonded across its whole surface — expect a slim border at the edges; that is what stops it lifting. The centred punch-hole camera sits under clear glass with nothing printed over it, so selfies and video calls look the same. The optical fingerprint reader under the display works through 0.33mm glass; re-register your finger after fitting.

Not interchangeable with the Realme 12: the Realme 12 is 6.67 inches against the Realme 12 Pro Plus’s 6.7.

Doesn't fit: Realme 12 or Realme 12 Plus — different panel size or cutout, despite being in the same Realme 12.

In every pack

10×

Tempered glass sheets, cut for the Realme 12 Pro Plus

Glass only. There is no alignment frame, cleaning pad or dust sticker in the pack, and the phone is not included.

Fitting it

Four steps, ten minutes

The full guide, with pictures →
  1. 01

    Clean the screen with a lint-free cloth, then lift any dust left with a strip of clear tape — a single speck is what causes a permanent bubble.

  2. 02

    Peel the backing and hold the sheet by its edges over the Realme 12 Pro Plus. Line up the cut-outs at the top first, then the sides.

  3. 03

    Lower the glass onto the centre of the panel and let go. The adhesive pulls itself outward from the middle.

  4. 04

    Press any remaining edge gently toward the border. Small perimeter bubbles clear on their own within 24 hours.

Questions about the Realme 12 Pro Plus

Will tempered glass slow down the Realme 12 Pro Plus’s fingerprint reader?

No. The Realme 12 Pro Plus reads your finger optically through the display, and at 0.33mm with full-surface adhesive there is no air gap for the light to scatter in. Delete and re-register your fingerprint after fitting — the sensor calibrates to what it reads through.

Will a Realme 12 protector fit the Realme 12 Pro Plus?

No. The Realme 12 is 6.67 inches against the Realme 12 Pro Plus’s 6.7, and the Realme 12 Pro Plus has a curved edge and the Realme 12 does not — a cut for one will not sit right on the other.

Why doesn’t the glass reach the very edge of the Realme 12 Pro Plus’s screen?

Because the edge curves. Tempered glass is rigid, and a sheet cut to wrap the bend lifts, traps air and shows a rainbow halo. Stopping just inside the curve keeps the whole sheet bonded; the thin border that leaves is deliberate.

What happens if one arrives damaged?

Check the pack when it arrives. A sheet that is chipped, cracked or cut for the wrong model is replaced — send us a photo and we ship a new one. You do not need to send the damaged sheet back.

How much is delivery, and how do I pay?

Delivery is ₹50 on the 3-pack and the 5-pack, free on the 10-pack. Pay in full online — UPI, cards, netbanking — or Partial COD, which costs nothing extra: a ₹250 booking fee online to confirm, and the rest in cash at the door. Orders placed before 4 PM IST are dispatched the same day.

Is it full glue or UV glass?

Full glue, not UV. The adhesive covers the whole sheet rather than a frame round the edge, so there is no air gap over the display or an in-display reader — and it is already on the glass: peel, line up, press. No liquid glue and no UV lamp.

Will it fit inside my case?

Yes. We cut to the active display area rather than the full front face, which leaves the case lip clear on every model we support. A protector cut edge-to-edge is the one that fights a case.

More on delivery, payment, returns and bulk orders: all questions →

More in the Realme 12

Before and after