Takes the hit first.
9H tempered glass cracks or chips in your hand, so the Pixel 9’s display underneath doesn’t.
9H glass 9HSurface hardness
0.33 mmThin over the display
2.5DBevelled, case-friendly edge
Pixel 9 · phone not included 9H glass Pixel 9 · phone not included Feels like the bare screen.
0.33 mm thin and bonded across its whole surface — no air gap between your finger and the Pixel 9’s display.
Full-surface adhesive Pixel 9 · phone not included Exactly as it was made.
No tint, no etch, no haze. The Pixel 9’s colour, brightness and sharpness stay as its maker calibrated them.
DailyProtect Pixel 9 · phone not included
Cut for the Pixel 9.
A flat display, so the sheet covers the full panel and bonds edge to edge, with nothing to lift at the sides.
6.3 inchesMeasured panel
Centre punch-holeLeft fully clear
Flat edgeCovers the full panel
Pixel 9 · phone not included Fingerprint unlock still works.
The ultrasonic reader works through glass but not through air gaps — which is why the adhesive covers the whole sheet.
Ultrasonic reader Pixel 9 · phone not included 3, 5 or 10 sheets.
One price for every phone, the Pixel 9 included. A spare is always in the drawer.
3 sheets · 70% off ₹599 ₹2,000 ₹200 a sheet · + ₹50 delivery
5 sheets · 70% off ₹699 ₹2,330 ₹140 a sheet · + ₹50 delivery
10 sheets · 70% off ₹999 ₹3,330 ₹100 a sheet · delivered free
Shops sell one screen guard for up to ₹799; we sell direct. Glass only — no alignment frame or cleaning kit in the pack.
Pixel 9 · phone not included 
Phone shown for reference — not included. You receive the tempered glass only.
Google · tempered glass · cut for one phone
Pixel 9 Super X Clear tempered glass
6.3" · Centre punch-hole · Flat panel · 0.33mm · 9H
This glass is cut for the Pixel 9 only. Have the Pixel 9 Pro? It needs its own cut — Pixel 9 Pro tempered glass →
This glass is cut for the Pixel 9 only. Have the Pixel 9 Pro XL? It needs its own cut — Pixel 9 Pro XL tempered glass →
This glass is cut for the Pixel 9 only. Have the Pixel 9 Pro Fold? It needs its own cut — Pixel 9 Pro Fold tempered glass →
₹999 MRP ₹3,330 70% off
Shops sell one screen guard for up to ₹799. We sell direct, so yours costs ₹100 a sheet — same 9H glass, no middleman.
Inclusive of all taxes. ₹50 delivery — free with the 10-pack. Saves against buying 3s.
Order before 4 PM IST — dispatched today from Bengaluru.
₹250 nowPartial COD, rest at the door 7 daysReturns on unused glass Chipped?A photo gets a new sheet
Glass only — no alignment frame or cleaning kit in the pack.
10 × tempered glass · phone not included · TG-GOO-PIXEL9-REG-10
Add a Pixel 9 skinBack + front · Matte or Clear · ships together New →What fits
Why this fits your Pixel 9
- Display
- 6.3"
- Aspect
- 20:9
- Edge
- Flat panel
- Cutout
- Centre punch-hole
- Unlock
- Ultrasonic in-display reader
- Thickness
- 0.33mm
A flat 6.3-inch panel with squared corners and a centred punch-hole. Cut to the active area and bonded across the whole sheet so the ultrasonic fingerprint reader has no air gap to read through.
Same nominal size as the 9 Pro, different bezel geometry — the cuts are not shared.
Doesn't fit: Pixel 9 Pro XL — different panel size or cutout, despite being in the same Pixel 9.
In every pack
10×
Tempered glass sheets, cut for the Pixel 9
Glass only. There is no alignment frame, cleaning pad or dust sticker in the pack, and the phone is not included.
Fitting it
Four steps, ten minutes
- 01
Clean the screen with a lint-free cloth, then lift any dust left with a strip of clear tape — a single speck is what causes a permanent bubble.
- 02
Peel the backing and hold the sheet by its edges over the Pixel 9. Line up the cut-outs at the top first, then the sides.
- 03
Lower the glass onto the centre of the panel and let go. The adhesive pulls itself outward from the middle.
- 04
Press any remaining edge gently toward the border. Small perimeter bubbles clear on their own within 24 hours.
Questions about the Pixel 9
Will this slow down the fingerprint reader?
No. The Pixel 9 line uses an ultrasonic reader, which reads through glass fine but is thrown off by air gaps — so the adhesive covers the whole sheet, not just the edges. Re-register your fingerprint after fitting.
Does a Pixel 9 Pro protector fit the Pixel 9?
No. Both are 6.3 inches, but the bezel widths differ between the standard and Pro lines, so the cuts are not shared.
What happens if one arrives damaged?
Check the pack when it arrives. A sheet that is chipped, cracked or cut for the wrong model is replaced — send us a photo and we ship a new one. You do not need to send the damaged sheet back.
How much is delivery, and how do I pay?
Delivery is ₹50 on the 3-pack and the 5-pack, free on the 10-pack. Pay in full online — UPI, cards, netbanking — or Partial COD, which costs nothing extra: a ₹250 booking fee online to confirm, and the rest in cash at the door. Orders placed before 4 PM IST are dispatched the same day.
Is it full glue or UV glass?
Full glue, not UV. The adhesive covers the whole sheet rather than a frame round the edge, so there is no air gap over the display or an in-display reader — and it is already on the glass: peel, line up, press. No liquid glue and no UV lamp.
Will it fit inside my case?
Yes. We cut to the active display area rather than the full front face, which leaves the case lip clear on every model we support. A protector cut edge-to-edge is the one that fights a case.
More on delivery, payment, returns and bulk orders: all questions →
More in the Pixel 9
Before and after